|
|
|
|
 |
 |
|
A cast bronze recognition tree provides beautiful, quality
recognition for donors, stimulates the interest of new donors,
and commemorates events. T1 tree with add-on top &
sides contains 575 leaves |
Exterior applications may require a custom cast tree. This
installation used oversized cast bronze leaves mounted to an
aluminum backing.
|
To represent 3 levels of giving, this T3 tree
accommodates 450 leaves in brass, copper and silver
colors.
|
|
|
 |
|
|
Names of donors engraved on individual leaves, small and large
stones represent different levels of giving. T4 tree
with 125 leaves. |
This T4 tree with 125 leaves has stones cast in
bronze at the base which may also be engraved for recognition. |
For 2 levels of giving, combine brass & aluminum leaves. T5
tree with 80 leaves. |
|
|
 |
 |
|
Recognition trees have cast bronze or aluminum trunks with
engravable brass leaves secured to a clear acrylic sheet.
T3 tree with 450 leaves. |
For a variation on the T4 tree, this T7 tree uses 200
standard brass leaves. |
This traditional T1 tree with 279 leaves was
customized with wording cast integral with the trunk. |
 |
 |
 |
|
Smaller cast bronze trees can be used for employee recognition
or as family trees. |
The contemporary cut-out brass trunk enhances a modern decor as
shown in this custom tree with brass stones. |
On exterior trees, the cast bronze leaves are engraved to expose
the natural bronze. |
 |
|
 |
|
Use bronze recognition trees to recognize years of service by
employees. T1 tree with 279 leaves |
|
Trunk is cut out
from 1/4" thick brass plate, satin finished and coated with a
protective lacquer. The dimensions of this trunk are 36" left to
right and 46" top to bottom |
